DeLonghi ETAM29.66X, Инструкция по эксплуатации

Страница: 15 / 25

14
etc.). Their meaning is explained in the section “Displayed
messages” (page 23).
• For hotter coffee, see the section “Tips for a hotter coffee”
(page 13).
• If the coffee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in the “Trouble-
shooting” section (page 23).
Making coffee using pre-ground coffee
Important!
• Never place coffee beans in the pre-ground coffee funnel
as this could damage the appliance.
• Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than 1 level measure or it could dirty the
inside of the coffee machine or block the funnel.
Please note!
When you use pre-ground coffee, you can only make one cup of
coffee at a time.
1. Press
the icon repeatedly (fig. 9) until “Pre-ground” is
displayed.
2. Open the pre-ground coffee funnel lid (A2).
3. Make sure the funnel is not blocked, then add one level
measure of pre-ground coffee (fig. 16).
4. Place a cup under the coffee spouts (fig. 13).
5. Press the 1 cup coffee icon
(B7).
6. Preparation begins. The amount of coffee selected is dis-
played together with a progress bar which gradually fills as
preparation progresses.
Please note!
If “Energy Saving” mode is active, you may have to wait a few
seconds before the first coffee is delivered.
Making coffee using coffee beans
Prepare the appliance following the instructions in the section
“Making coffee using coffee beans”, then press the icon
(B11).
Customising the coffee quantity
The appliance is set by default to deliver about 120 ml of
coffee. To modify these settings, proceed as follows:
1. Place a sufficiently large cup or glass under the coffee
spouts (fig. 13);
2. Press and hold the icon (B11) until “Program quanti-
ty” is displayed;
3. Release the icon. The appliance starts delivering
coffee;
4. As soon as the coffee in the cup reaches the required level,
press the icon again.
The quantity of coffee in the cup has now been programmed.
Please note!
You can programme a minimum quantity of about 80ml.
You can programme a maximum quantity of about 160ml.
Making LONG coffee using coffee beans
Prepare the appliance following the instructions in the section
“Making coffee using coffee beans”, then press the icon
(B10).
Making LONG coffee using pre-ground coffee
1. Follow the instructions in points 1, 2, 3 and 4 of the section
“Making coffee using pre-ground coffee”, then press the
icon (B10).
2. The appliance starts making coffee and displays a progress
bar. Halfway through preparation, the message “ADD PRE-
GROUND COFFEE, Press OK” appears.
3. Add one level measure of pre-ground coffee and press
(fig. 6).
4. Preparation resumes and the appliance displays a progress
bar which fills gradually as preparation proceeds.
Customising the “LONG coffee” quantity
The appliance is set by default to automatically deliver about
200ml of LONG coffee. To modify these settings, proceed as
follows:
1. Place a sufficiently large cup or glass under the coffee
spouts (fig. 13).
2. Press and hold the icon (B10) until “Program quanti-
ty” is displayed.
3. Release the icon. The appliance starts delivering
coffee.
4. As soon as the coffee in the cup reaches the required level,
press the icon again.
The quantity of coffee in the cup has now been programmed.
Please note!
If the programme uses pre-ground coffee, the appliance will
prompt you to add a second level measure of coffee.