DeLonghi ETAM29.66X, Инструкция по эксплуатации

Страница: 14 / 25

13
Strong taste
Extra-strong taste
To change the taste, press the
icon (fig. 9) repeatedly until
the required taste is displayed.
Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
icon
(fig. 10) until the message corresponding to the required quan-
tity of coffee is displayed:
Coffee selected Quantity in cup (ml)
MY COFFEE Programmable:
from 㲒 20 to 㲒 180
SHORT 㲒 40
STANDARD 㲒 60
LONG 㲒 90
EXTRA LONG COFFEE 㲒 120
Customising the “my coffee” quantity
The appliance is set by default to automatically deliver 30 ml of
“MY COFFEE”. To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts ( fig. 13).
2. Press
the icon (fig. 10) until “MY COFFEE” is
displayed.
3. Keep the icon (B7) pressed until the message “1 MY
COFFEE Program quantity” is displayed and coffee delivery
begins. Release the icon.
4. As soon as the coffee in the cup reaches the required level,
press the icon again.
The quantity of coffee in the cup has now been programmed.
Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (fig. 11).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coffee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time). These adjustments will only be evident after
at least 2 cups of coffee have been delivered. If this adjustment
does not obtain the desired result, turn the dial another click.
Tips for a hotter coffee
For hotter coffee, you should:
•
perform a rinse cycle by selecting the “Rinsing” function in
the settings menu (page 10).
• warm the cups with hot water (using the hot water
function);
• increase the coffee temperature in the settings menu
(page 12).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container with coffee beans (fig. 12).
2. Place under the coffee spouts:
- 1 cup, if you want to make 1 coffee (fig. 13);
- 2 cups, if you want 2 coffees (fig. 14).
3. Lower the spouts as near as possible to the cup. This makes
a creamier coffee (fig. 15).
4. Press the icon corresponding to the number of coffees re-
quired (one cup or two cups ).
5. Preparation begins. The amount of coffee selected is dis-
played together with a progress bar which gradually fills as
preparation progresses.
Please note:
• While the machine is making coffee, delivery can be inter-
rupted at any moment by pressing any icon.
• At the end of delivery, to increase the quantity of coffee in
the cup, just press one of the coffee icons (B6 or B7) (within
3 seconds).
Once the coffee has been made, the appliance is ready to make
the next drink.
Important!
• Various alarm messages could be displayed while using
the machine (FILL TANK, EMPTY GROUNDS CONTAINER,