DeLonghi ECAM23210B, Инструкция по эксплуатации

Страница: 21 / 60

19
EXPLANATION OF LIGHTS
LIGHT POSSIBLE CAUSE REMEDY
Insufficient water in the tank. ˆÊÌ iÊÌ>˜ŽÊÜˆÌ ÊÜ>ÌiÀÊ>˜`ʈ˜ÃiÀÌʈÌÊVœÀÀiV̏Þ]Ê
pushing it as far as it will go until it clicks
into place.
The tank is not correctly in place. Insert the tank correctly and press as far as
it will go.
The grounds container (A13)
is full.
Empty the grounds container and drip tray,
clean and replace.
Important: when removing the drip tray, the
grounds container MUST be emptied, even if
it contains few grounds.
If this is not done, when you make the next
coffee, the grounds container may fill up more
coffee than expected and clog the machine.
After cleaning, the grounds
container has not been replaced.
Remove the drip tray and insert the grounds
container.
The grinding is too fine and the
coffee is delivered too slowly or
not at all.
Repeat coffee delivery and turn the grinding
adjustment knob (fig. 10) one click clockwise
towards “7” while the coffee mill is in
operation.
If after making at least 2 coffees delivery is
still too slow, repeat the correction procedure,
turning the grinding adjustment knob another
click until delivery is correct (see the section:
Adjusting the coffee mill on page 29).
If the problem persists, turn the steam knob
to the I position and deliver water from the
cappuccino maker.