Dell XPS Gen 3, Руководство пользователя

Страница: 92 / 146

92
Removing and Installing Parts
www
.dell.com | support.dell.com
3
Attach the power and data cables to the floppy drive.
4
Connect the other end of the data cable to the connector labled FLOPPY on the system
board (see page 69).
5
Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
6
Close the computer cover (see page 108).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
7
Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
8
Enter system setup (see page 113) and update the appropriate Diskette Drive option.
9
Verify that your computer works correctly by running the Dell Diagnostics (see page 50).
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide .
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
Removing a CD/DVD Drive
1
Follow the procedures in "Before You Begin" on page 61.
2
Disconnect the power and data cables from the back of the drive.