background image

Advanced Troubleshooting

55

3

When the 

InstallShield Wizard Complete

 window appears, remove the ResourceCD and 

click 

Finish

 to restart the computer.

4

When you see the Windows desktop, reinsert the ResourceCD.

5

At the 

Welcome Dell System Owner

 screen, click 

Next

.

 

NOTE: 

The ResourceCD displays drivers only for hardware that came installed in your computer. If you 

installed additional hardware, the drivers for the new hardware might not be displayed by the 
ResourceCD. If those drivers are not displayed, exit the ResourceCD program. For drivers information, 
see the documentation that came with the device.

A message stating that the ResourceCD is detecting hardware in your computer appears.

The drivers that are used by your computer are automatically displayed in the 

My Drivers—The ResourceCD has identified these components in your system

 window.

  6

Click the driver that you want to reinstall and follow the instructions on the screen. 

If a particular driver is not listed, then that driver is not required by your operating system.

Manually Reinstalling Drivers 

1

After extracting the driver files to your hard drive as described in the previous section, click 
the 

Start

 button and right-click 

My Computer

.

2

Click 

Properties

.

3

Click the 

Hardware

 tab and click 

Device Manager

.

4

Double-click the type of device for which you are installing the driver.

5

Double-click the name of the device for which you are installing the driver.

6

Click the 

Driver

 tab and click 

Update Driver

.

7

Click 

Install from a list or specific location (Advanced)

 and click 

Next

.

8

Click 

Browse

 and browse to the location to which you previously extracted the driver files.

9

When the name of the appropriate driver appears, click 

Next

.

10

Click 

Finish

 and restart your computer.

Using Microsoft

®

 Windows

®

 XP System Restore

The Microsoft

®

 Windows

®

 XP operating system provides System Restore to allow you to return 

your computer to an earlier operating state (without affecting data files) if changes to the 
hardware, software, or other system settings have left the computer in an undesirable operating 
state. See the Windows Help and Support Center for information on using System Restore. To 
access help, see page 11.

 

NOTICE: 

Make regular backups of your data files. System Restore does not monitor your data files or 

recover them.

Содержание XPS Gen 3



















































































































































Отзывы: