10. Replace and tighten the two screws securing the display assembly to the bottom of the computer.
11. Replace the Mini-Card and connect the antenna cables to it (see
Replacing Mini-Card
).
12. Replace the bottom cover and tighten the eight captive screws on the cover.
Display Bezel
Removing the Display Bezel
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product
Information Guide
.
1. Follow the instructions in
Before You Begin
.
2. Remove the center control cover (see
Removing the Center Control Cover
).
3. Remove the keyboard (see
Removing the Keyboard
).
4. Remove the display assembly (see
Removing the Display Assembly
).
5. Remove the six rubber display bumpers from around the display bezel.
6. Remove the captive screw and five shoulder screws from around the display bezel.
1 captive screw
2 rubber display bumpers (6)
3 shoulder screws (5) 4 display panel
5 display bezel
NOTICE:
Removal of the bezel from the display bottom cover requires extreme care to avoid damage to the bezel and
the display panel.
Содержание Vostro 500
