Rack Installation
NOTE:
The 2U system requires two people for installation due to its heavier weight.
Installing the system into the rack (option A: Drop-In)
The sliding rails are a "drop-in" design. This means that the system is installed vertically into the rails by inserting the standoffs on the sides
of the system into the "J-slots" in the inner rail members with the rails in the fully extended position. As with all 2U systems, a minimum of
two people are required in order to properly install the system in the rails.
1
Pull the inner rails out of the rack until they lock into place.
72
Removing and installing components
