Dell Precision 7920 Rack Скачать руководство пользователя страница 30

Страница: 30 / 118

Disassembly and reassembly

The following sections contain the procedures for removing and replacing system components.

Front Bezel

Removing the optional front bezel

Locate and remove the bezel key.

NOTE:

The bezel key is attached to the LCD bezel package.

Unlock the bezel by using the key.

Press the release button to release the bezel, and pull the left end of the bezel.

Unhook the right end, and remove the bezel.

Installing the optional front bezel

Locate and remove the bezel key.

NOTE:

The bezel key is attached to the LCD bezel package.

Align and insert the right end of the bezel onto the system .

Press the release button and fit the left end of the bezel onto the system.

Lock the bezel by using the key.

Removing and installing components

Содержание Precision 7920 Rack























































































































Результаты поиска

Содержание Precision 7920 Rack

Отзывы:

Dell Precision 7920 Rack, Руководство пользователя, Страница: 30 / 118

Результаты поиска

Содержание Precision 7920 Rack

Отзывы: