Dell PowerVault MD3800i Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 56

background image

•

Silent Installation

— This installation procedure is useful for users that prefer to create scripted

installations.

Modular Disk Configuration Utility

The PowerVault MD Configuration Utility (MDCU) is a utility that provides a consolidated approach for
configuring the management and iSCSI host ports, and creating sessions for the iSCSI modular disk
storage arrays. It is recommended that you use PowerVault MDCU to configure iSCSI on each host server
connected to the storage array.

Graphical Installation (Recommended)

The PowerVault MD Storage Manager software configures, manages, and monitors the storage array. The

MD Configuration Utility (MDCU) is a utility that provides a consolidated approach for configuring the

management and iSCSI host ports, and creating sessions for the iSCSI modular disk storage arrays. It is

recommended that you use MDCU to configure iSCSI on each host server connected to the storage

array. To install the MD storage software:

1.

Insert the PowerVault MD series resource media.
Depending on your operating system, the installer may launch automatically. If the installer does not
launch automatically, navigate to the root directory of the installation media (or downloaded installer
image) and run the

md_launcher.exe

file. For Linux-based systems, navigate to the root of the

resource media and run the autorun file.

NOTE: By default, Red Hat Enterprise Linux mounts the resource media with the

–noexec

mount option which does not allow you to run executable files. To change this setting, see the

Readme

file in the root directory of the installation media.

2.

Select

Install MD Storage Software

.

3.

Read and accept the license agreement.

4.

Select one of the following installation options from the

Install Set

dropdown menu:

• Full (recommended) — Installs the MD Storage Manager (client) software, host-based storage

agent, multipath driver, and hardware providers.

• Host Only — Installs the host-based storage agent and multipath drivers.
• Management — Installs the management software and hardware providers.
• Custom — Allows you to select specific components.

5.

Choose whether to start the event monitor service automatically when the host server reboots or

manually.

NOTE: This option is applicable only to Windows client software installation.

6.

Confirm the installation location and choose

Install

.

7.

If prompted, reboot the host server after the installation completes.

8.

After the reboot has completed, launch MDCU manually if automatic launch was not selected during
installation. You can do it in any of the following ways:
• In a Windows-based operating system, click

Start

→

Dell

→

Modular Disk Configuration Utility

.

• In a Linux-based operating system, double-click the

Modular Disk Configuration Utility

icon on

the desktop.

9.

Establish the iSCSI intiator using MDCU.

10.

Start MD Storage Manager and discover the arrays.

25

«
...
23
24
25
26
27
...
»

Содержание PowerVault MD3800i

























































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault MD3800i

System Storage DS4000

Бренд: IBM Страницы: 184

Бренд: Quantum Страницы: 78

Бренд: Lexar Страницы: 2

TOWERRAID TR4M+

Бренд: Sans Digital Страницы: 1

Бренд: IBM Страницы: 2

Бренд: Compaq Страницы: 139

SATAII/300 INTERNAL HARD DRIVE

Бренд: Maxtor Страницы: 19

CANOPIA SKYLIGHT 4x3/1.2x1

Бренд: Palram Страницы: 50

Бренд: LaCie Страницы: 2

Combo ION GHE135C

Бренд: IOGear Страницы: 39

Бренд: HGST Страницы: 51

Бренд: Netstor Страницы: 17

Бренд: GARDEN MASTER Страницы: 8

Бренд: Canon Страницы: 76

TIGERFLEX SHIPLAP APEX BIKE SHED

Бренд: Tiger Страницы: 16

Бренд: NetApp Страницы: 74

Бренд: G-Technology Страницы: 24

ARCHITECTURAL SERIES

Бренд: Heartland Страницы: 65

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды