Dell PowerVault MD3800i Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 56

background image

3

Installing PowerVault MD Storage

Software

The Dell PowerVault MD series resource media contains software and drivers for both Linux and
Microsoft Windows operating systems.

The root of the media contains a

readme.txt

file covering changes to the software, updates, fixes,

patches, and other important data applicable to both Linux and Windows operating systems. The

readme.txt

file also specifies requirements for accessing documentation, information regarding versions

of the software on the media, and system requirements for running the software.

For more information on supported hardware and software for Dell PowerVault systems, see the

Dell

PowerVault MD34xx/38xx Series Support Matrix

at

Dell.com/support/manuals

.

NOTE: It is recommended that you install all the latest updates available at

Dell.com/support/

manuals

.

The PowerVault MD series resource media provides features that include the core software, providers,
and utilities. The core software feature includes the host-based storage agent, multipath driver, and
Modular Disk Storage Manager (MDSM) application used to configure, manage, and monitor the storage
array solution. The providers feature includes providers for the Microsoft Virtual Disk Service (VDS) and
Microsoft Volume Shadow-Copy Service (VSS) framework.

NOTE: Dell is discontinuing support of the VSS and VDS hardware providers. See the

Dell MD Series

Storage Arrays Information Update

for details on the deprecation. For supported software, refer to

the

Supported Management Software

section of the

Dell™ PowerVault™ MD Series Support Matrix

at

Dell.com/ powervaultmanuals.

If Dynamic Host Configuration Protocol (DHCP) is not used, during initial configuration of the
management station, at least one network adapter must be configured on the same IP subnet as the
storage array’s default management port (Controller 0 MGMT (port 1):

192.168.129.101

or Controller 1

MGMT (port 1):

192.168.129.102

). After initial configuration, the management ports are configured

using MDSM and the management station’s IP address can be changed back to the previous settings.

NOTE: Only two management ports per array are supported. The second port on each controller is
reserved.

NOTE: To install the software on a Windows or Linux system, you must have administrative or root
privileges.

The PowerVault MD series resource media offers the following three installation methods:

•

Graphical Installation (Recommended)

— This is the recommended installation procedure for most

users. The installer presents a graphical wizard-driven interface that allows customization of which

components are installed.

•

Console Installation

— This installation procedure is useful for Linux users that do not desire to install

an X-Window environment on their supported Linux platform.

24

«
...
22
23
24
25
26
...
»

Содержание PowerVault MD3800i

























































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault MD3800i

System Storage DS4000

Бренд: IBM Страницы: 184

Бренд: TerraMaster Страницы: 13

Бренд: G&T SALES Страницы: 2

Бренд: Western Digital Страницы: 2

CANOPIA RUBICON

Бренд: Palram Страницы: 71

AltaVault System

Бренд: NetApp Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 10

Бренд: Philips Страницы: 10

Бренд: Philips Страницы: 14

Бренд: Philips Страницы: 98

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды