Dell PowerVault MD3800i Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 56

background image

11.

If applicable, activate any premium features purchased with your storage array. If you purchased
premium features, see the printed activation card shipped with your storage array.

NOTE: The

MD Storage Manager

installer automatically installs the required drivers, firmware,

and operating system patches/hotfixes to operate your storage array. These drivers and
firmware are also available at

Dell.com/support

. In addition, see the

Dell PowerVault MD34xx/

38xx Series Support Matrix

at

Dell.com/support/manuals

for any additional settings and/or

software required for your specific storage array.

Console Installation

NOTE: Console installation only applies to Linux systems that are not running a graphical
environment.

The autorun script in the root of the resource media detects when there is no graphical environment
running and automatically starts the installer in a text-based mode. This mode provides the same options
as graphical installation with the exception of the MDCU specific options. The MDCU requires a graphical
environment to operate.

NOTE: The console mode installer provides the option to install the MDCU. However, a graphical
environment is required to use the MDCU.

Silent Installation

Silent Installation On Windows Systems

To run silent installation on a Windows system:

1.

Copy the

custom_silent.properties

file in the

/windows

folder of the installation media or image to a

writable location on the host server.

2.

Modify the

custom_silent.properties

file to reflect the features, models, and installation options to

be used. Then, save the file.

3.

Once the

custom_silent.properties

file is revised to reflect your specific installation, run the

following command to begin the silent installation: mdss_install.exe –f <host_server_path>\

custom_silent.properties.

Silent Installation On Linux Systems

NOTE: On Red Hat Enterprise Linux 6 operating systems, run the following script from the root

directory to install prerequisite packages:

# md_prereq_install.sh

.

1.

Copy the

custom_silent.properties

file in the

/linux

folder of the installation media or image to a

writable location on the host server.

2.

Modify the

custom_silent.properties

file to reflect the features, models, and installation options to

be used. Then, save the file.

3.

Once the

custom_silent.properties

file is revised to reflect your specific installation, run the

following command to begin the silent installation:mdss_install.bin –f <host_server_path>/
custom_silent.properties.

26

«
...
24
25
26
27
28
...
»

Содержание PowerVault MD3800i

























































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault MD3800i

G-DRIVE mobile USB

Бренд: G-Technology Страницы: 13

Бренд: RAID Страницы: 108

Бренд: Seagate Страницы: 24

Бренд: Accordance Systems Страницы: 22

H-Post Shelving

Бренд: Hallowell Страницы: 7

Бренд: QNAP Страницы: 45

Бренд: garofalo Страницы: 20

Mobile Memory Card TS1GRMMC4

Бренд: Transcend Страницы: 11

Бренд: Clarke Страницы: 4

Бренд: Dancover Страницы: 30

Бренд: ZRGP Страницы: 33

Бренд: Siemens Страницы: 2

Бренд: Siemens Страницы: 40

Gigaset USB Stick 108

Бренд: Siemens Страницы: 58

SIMODRIVE 611-D

Бренд: Siemens Страницы: 1154

Бренд: Foxconn Страницы: 45

Бренд: Dataman Страницы: 13

Бренд: Festool Страницы: 132

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды