4
Press the memory module with your thumbs until the socket levers firmly click into place.
When the memory module is properly seated in the socket, the levers on the memory module socket align with the levers on the other
sockets that have memory modules installed.
Figure 22. Installing the memory module
1
memory module
2
alignment key
3
memory module socket ejector (2)
Next steps
1
If removed, reinstall the PCIe expansion card riser.
2
Follow the procedure listed in the After working inside your system section.
3
Press F2 to enter System Setup, and check the
System Memory
setting.
The system should have already changed the value to reflect the installed memory.
4
If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory module is firmly
seated in the memory module socket.
5
Run the system memory test in system diagnostics.
Related link
Safety instructions
Before working inside your system
After working inside your system
Removing the optional expansion card riser
Removing an expansion card from the expansion card riser
Removing the cooling shroud
Installing an expansion card into the expansion card riser
Installing the optional expansion card riser
Installing the cooling shroud
Removing memory modules
Hard drives
Your system supports up to eight 3.5-inch or 2.5-inch hot-swappable hard drives or SSDs.
80
Installing and removing system components
