96
Figure 51. Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
1. SSD carrier
2. SSD
Related links
Safety instructions
Removing a 1.8-inch SSD from a 1.8-inch SSD carrier
Removing the hard drive or SSD cage
Prerequisites
CAUTION: Many repairs may only be done by a
certified
service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
1.
Follow the safety guidelines listed in safety instructions section.
2.
Keep the Phillips #1 screwdriver ready.
3.
Followthe procedure listed in the Beforeworking inside yoursystem section.
4.
Remove the hard drive(s) orSSD(s).
5.
Remove the hard drive or SSD backplane.
Steps
1.
Remove the four screws securing the hard drive or SSD cage to the chassis.
2.
Holding the hard drive or SSD cage by its edges, lift it up and away from the system.
