40
Option Description
For
AHCI
or
RAID
mode, BIOS support is always enabled.
Option Description
Model
Specifies the drive model of the selected device.
Drive Type
Specifies the type of drive attached to the SATA port.
Capacity
Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Port J
Sets the drive type of the selected device. For
Embedded SATAsettings
in
ATA
mode, set this field to
Auto
to enable BIOS support. Set it to
OFF
to turn off BIOS support.
For
AHCI
or
RAID
mode, BIOS support is always enabled.
Option Description
Model
Specifies the drive model of theselected device.
Drive Type
Specifies the type of drive attached to the SATA port.
Capacity
Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Related links
SATA Settings
Viewing SATA Settings
Integrated Devices
Youcan use the
Integrated Devices
screen to viewand configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Related links
Integrated Devices details
System BIOS
Viewing Integrated Devices
Viewing Integrated Devices
To view the
Integrated Devices
screen, perform the following steps:
1.
Turn on, or restart your system.
2.
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to
finish
booting, and then
restart your system and try again.
3.
On the
System Setup Main Menu
screen, click
System BIOS
.
4.
On the
System BIOS
screen, click
Integrated Devices
.
Related links
Integrated Devices
Integrated Devices details
Integrated Devices details
The
Integrated Devices
screen details are explained as follows:
