Dell PowerEdge 4200 Series, Руководство администратора, Страница: 331 / 440

Users Configuration | 331
Note
When entering Login user name and Login password , remember that the SRA
appliance binds to the LDAP tree with these credentials and users can log in with
their sAMAccountName.
Step 7
Enter the name of the portal in the Portal name field. Additional layouts may be defined in the
Portals > Portals page.
Step 8
Select the Allow password changes (if allowed by LDAP server) check box if you want to
be able to change user’s passwords. The admin account must be used when changing user
passwords.
Step 9
Select the Delete external user accounts on logout check box to delete users who are not
logged into a domain account after they log out.
Step 10
Optionally select the One-time passwords check box to enable the One-time password
feature. A drop-down list will appear, in which you can select if configured , required for all
users , or using domain name . These are defined as:
•
if configured - Only users who have a One Time Password email address configured will
use the One Time Password feature.
•
required for all users - All users must use the One Time Password feature. Users who do
not have a One Time Password email address configured will not be allowed to login.
•
using domain name - Users in the domain will use the One Time Password feature. One
Time Password emails for all users in the domain will be sent to username@domain.com.
Step 11
If you select One-time passwords , an LDAP e-mail attribute drop-down list appears. Select
one of the following:
•
mail - Select mail if this is the name of your LDAP email attribute.
•
userPrincipalName - Select userPrincipalName if this is the name of your LDAP email
attribute.
•
custom - Select custom to enter any other LDAP email attribute. Enter the attribute name
into the Custom attribute field that appears.
Step 12
Navigate to the Users > Local Groups page and click the configure icon. The Edit Group
Settings page is displayed, with fields for LDAP attributes on the General tab.
Step 13
On the General tab, you may optionally fill out one or multiple LDAP Attribute fields with the
appropriate names where name=value is the convention for adding a series of LDAP attributes.
To see a full list of LDAP attributes, refer to the Dell SonicWALL LDAP Attribute document .