Dell PowerEdge 4200 Series, Руководство администратора, Страница: 314 / 440

314 | SRA 6.0 Administrator’s Guide
Configuring End Point Control for Users
To configure the End Point Control profiles used by a local user, perform the following steps:
Step 1
Navigate to the Users > Local Users page.
Step 2
Click the configure icon next to the user to be configured for EPC. The Edit Local User window
is displayed.
Step 3
Click the EPC tab. The EPC window is displayed.
Step 4
Configure EPC user settings and add or remove device profiles, as explained in “Users > Local
Users > Edit EPC Settings” on page 208.
Users > Local Groups
This section provides an overview of the Users > Local Groups page and a description of the
configuration tasks available on this page.
•
“Users > Local Groups Overview” section on page 314
•
“Deleting a Group” section on page 315
•
“Adding a New Group” section on page 315
•
“Editing Group Settings” section on page 316
•
“Group Configuration for LDAP Authentication Domains” section on page 329
•
“Group Configuration for Active Directory, NT and RADIUS Domains” section on page 333
•
“Creating a Citrix Bookmark for a Local Group” on page 336
For a description of global settings for local groups, see the “Global Configuration” section on
page 336 .
Users > Local Groups Overview
The Users > Local Groups page allows the administrator to add and configure groups for
granular control of user access by specifying a group name and domain.
Note that a group is automatically created when you create a domain. You can create domains
in the
Portals > Domains page. You can also create a group directly from the Users > Local
Groups page.
Figure 54 Users > Local Groups Page
Group memberships are split into two groups, ‘primary’ and ‘additional’.