Dell PowerEdge 4200 Series, Руководство администратора

Страница: 199 / 440

NetExtender Configuration | 199
Configuring User NetExtender Routes
To configure user NetExtender routes:
Step 1
To add a NetExtender client route that will only be added to this user, click the Nx Routes tab
in the Edit User Settings window.
Step 2
Add Client Route button.
Step 3
Type the IPv4 or IPv6 address of the trusted network to which you would like to provide access
with NetExtender in the
Destination Network field.
Step 4
For an IPv4 client route, type the subnet mask in the Subnet Mask/Prefix field. For an IPv6
client route, type the prefix in this field.
Step 5
Click Add .
Step 6
Repeat steps 1 through 5 for all necessary routes.
Step 7
Select Enabled from the Tunnel All Mode drop-down list to force all traffic for this user—
including traffic destined to the remote users’ local network—over the SRA NetExtender tunnel.
Step 8
To also add the global NetExtender client routes (which are configured on NetExtender >
Client Routes page) to the user, select the Add Global NetExtender Client Routes check
box.
Step 9
To also add the group NetExtender client routes for the group the user belongs to, select the
Add Group NetExtender Client Routes check box. Group NetExtender routes are configured
on the NetExtender tab of the Edit Group window, which is accessed through the Users >
Local Groups page.
Step 10
Click Accept .
Note When using an external authentication server, local usernames are not typically configured
on the SRA appliance. In such cases, when a user is successfully authenticated, a local user
account is created with the
Add Global NetExtender Client routes and Add Group
NetExtender Client routes settings enabled.