manualshive.com logo in svg

Dell PowerConnect W-IAP175P, Руководство пользователя

Поделиться
Скачать
Dell PowerConnect W-IAP175P Скачать руководство пользователя страница 69

Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0

  | User Guide

Managing IAPs  |  

69

4. The 

Confirm Reboot for IAP window

 will appear. Click 

Reboot Now

 to proceed.

Figure 54  

Confirm Reboot message

5. The 

Reboot in Progress 

message will appear indicating that the reboot is in progress.

Figure 55  

Reboot In progress

6. The 

Reboot Successful

 message appears once the process is complete. If the system fails to boot, then the 

Unable to contact Access Points after reboot was initiated message

 will appear

.

Figure 56  

Reboot Successful

7. Click 

OK 

to close the window

 

and re-login to the system.

Firmware Image Server in Cloud Network

The image check feature allows the IAP to discover new software image versions on a cloud-based image server 
hosted by Dell. The location of the image server is fixed and cannot be changed by the user. Dell takes care of 
managing the image server, and ensures that the image server is loaded with latest versions of ArubaOS software 
for its products.

The Virtual Controller (VC) in Instant AP communicates with the Image server via an Aruba Networks 
proprietary protocol. The Image server queries the VC. The VC returns the following information:

Current software version

Type Code

Globally Unique ID (GUID)

OEM-Tag 

Organization (if available)

Access Point Information (for each AP attached to the VC)

AP type

AP serial number

The VC expects the available upgrade VC software version and the URL in return. This query normally happens 
once in a week.

Содержание PowerConnect W-IAP175P































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды