manualshive.com logo in svg

Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 6024 Скачать руководство пользователя страница 496

496

802.1x Commands

www

.dell.com | support.dell.com

The following table describes the significant fields shown in the display:

Tx period:               30 Seconds

Max req:                 2

Supplicant timeout:      30 Seconds

Server timeout:          30 Seconds

Session Time (HH:MM:SS): 08:19:17

MAC Address:             00:08:78:32:98:78

Authentication Method:   Remote

Termination Cause: Supplicant logoff

Authenticator State Machine

State:

HELD

Backend State Machine

State:

IDLE

Authentication success:  9

Authentication fails:    1

Field

Description

Port

The port number.

Admin mode

The port admin mode. Possible values are: Force-auth, Force-unauth, 
Auto.

Oper mode

The port oper mode. Possible values are: Authorized, Unauthorized or 
Down. 

Reauth Control

Reauthentication control.

Reauth Period

Reauthentication period.

Username

The username representing the identity of the Supplicant. This field 
shows the username in case the port control is auto. If the port is 
Authorized, it shows the username of the current user. If the port is 
unauthorized it shows the last user that was authenticated successfully.

Quiet period

The number of seconds that the device remains in the quiet state 
following a failed authentication exchange (for example, the client 
provided an invalid password).

Tx period

The number of seconds that the device waits for a response to an 
Extensible Authentication Protocol (EAP)-request/identity frame from 
the client before resending the request.

Содержание PowerConnect 6024

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды