manualshive.com logo in svg

Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 6024 Скачать руководство пользователя страница 290

290

QoS Commands

www

.dell.com | support.dell.com

Example

The following example defines the wrr-queue mechanism on an egress queue to tail-drop.

show qos interface

The 

show qos interface

 user EXEC command displays interface QoS data.

Syntax

show qos interface 

[

ethernet

 

interface-number

 |

 

vlan

 vlan-id | 

port-channel

 number

] [

buffers 

| queuing | policers | shapers

] 

•

ethernet

 

interface-number

—Ethernet port number.

•

vlan 

vlan-id

—VLAN number.

•

port-channel 

number

—Port-channel.

•

buffers

—Displays buffer setting for the interface queues. For gigabit Ethernet interfaces, 

the queue depth for each of the 8 queues and the thresholds for the WRED/Tail Drop are 
displayed. For 10/100 interfaces the minimum reserved settings are displayed.

•

queuing

—Displays the queue strategy (WRR or EF), the weight for WRR queues, the 

CoS to queue map and the EF priority.

•

shapers

—Displays the specified interface shaper and the shaper for the queue on the 

specified interface.

•

policers

—Displays all the policers configured for this interface, their setting, and the 

number of policers currently unused.

Default Configuration

For VLAN interface only the 

policers

 option is relevant.

If no keyword is specified with the 

show qos interface

 command, the port QoS mode, default 

CoS value, DSCP-to-DSCP-mutation map (if any) attached to the port, and policy map (if 
any) attached to the interface are displayed. If a specific interface is not specified, the 
information for all interfaces is displayed.

Command Mode

User EXEC mode

User Guidelines

There are no user guidelines for this command.

Console (config)# 

interface ethernet

 g5

Console (config-if)# 

wrr-queue tail-drop

Содержание PowerConnect 6024

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды