manualshive.com logo in svg

Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 6024 Скачать руководство пользователя страница 362

362

SNMP Commands

www

.dell.com | support.dell.com

The following example configures community access string 

public

 to permit SNMP read-write 

access for the Out-of-Band port only.

snmp-server host

The 

snmp-server host 

global configuration command specifies the recipient of Simple Network 

Management Protocol Version 1 or Version 2 notifications. To remove the specified host, use the 

no 

form of this command.

Syntax

snmp-server host {

ip-address

 | 

hostname

} 

community-string

 [traps | informs]  [1 | 2]  [udp-

port 

port

] [filter 

filtername

] [timeout 

seconds

] [retries 

retries

]

no snmp-server host {

ip-address

 | 

hostname

} [traps | informs]

•

ip-address

—Specifies the IP address of the host (targeted recipient). For information 

about specifying an out-of-band IP address, see the user guidelines.

•

hostname

—Specifies the name of the host. (Range:1-158 characters)

•

community-string

—Specifies a password-like community string sent with the notification 

operation. (Range: 1-20)

•

traps

—Indicates that SNMP traps are sent to this host.

•

informs

—Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1.

•

1

—Indicates that SNMPv1 traps will be used.

•

2

—Indicates that SNMPv2 traps will be used.

•

port

—Specifies the UDP port of the host to use. (Range:1-65535)

•

filtername

—Specifies a string that defines the filter for this host. If unspecified, nothing 

is filtered. (Range: 1-30 characters)

•

seconds

—Specifies the number of seconds to wait for an acknowledgment before 

resending informs. (Range: 1-300)

•

retries—Specifies the maximum number of times to resend an inform request. 
(Range: 0-255)

Default Configuration

The default is to send SNMPv2 traps to the host.

The default UDP port of the host to use is 162.

The default timeout period to wait for an acknowedgement before resending informs is 15 
seconds.

Console (config)# 

snmp-server community

 public 

rw

 192.175.1.10 

type

 oob 

Содержание PowerConnect 6024

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды