manualshive.com logo in svg

Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 6024 Скачать руководство пользователя страница 413

Syslog Commands

413

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example limits messages logged to the console based on severity level "errors".

logging buffered

The 

logging buffered

 global configuration command limits syslog messages displayed from an 

internal buffer based on severity. To cancel the buffer use, use the 

no 

form of this command.

Syntax

logging buffered

 

level

no logging buffered

•

level

—Limits the message logging to a specified level buffer: 

emergencies, alerts

, 

critical

, 

errors, warnings

, 

notifications, informational, debugging.

Default Configuration

The default level is 

informational

.

Command Mode

Global Configuration mode

User Guidelines

All the syslog messages are logged to the internal buffer. This command limits the commands 
displayed to the user.

Example

The following example limits syslog messages displayed from an internal buffer based on the 
severity level "debugging".

logging buffered size

The 

logging buffered size 

global configuration command changes the number of syslog messages 

stored in the internal buffer. To return the number of messages stored in the internal buffer to the 
default value, use the 

no 

form of this command.

Console (config)# 

logging console

 errors

Console (config)# 

logging buffered

 debugging

Содержание PowerConnect 6024

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды