manualshive.com logo in svg

Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 6024 Скачать руководство пользователя страница 352

352

SNMP Commands

www

.dell.com | support.dell.com

Examples

The following example sets the scalar MIB "sysName" to have the value "dell".

The following example sets the entry MIB "rndCommunityTable" with keys 0.0.0.0 and "public". 
The field rndCommunityAccess gets the value "super" and the rest of the fields get their default 
values.

snmp-server view

The 

snmp-server view 

global configuration command creates or updates a Simple Network 

Management Protocol (SNMP) server view entry. To delete a specified SNMP server view entry, use 
the 

no

 form of this command.

Syntax

snmp-server view

 

view-name oid-tree

 

{included | excluded}

 

no snmp-server view

 

view-name

 [

oid-tree

]

•

view-name

—Specifies the label for the view record that is being created or updated. The 

name is used to reference the record. (Range: 1-30 characters)

•

oid-tree

—Specifies the object identifier of the ASN.1 subtree to be included or excluded 

from the view. To identify the subtree, specify a text string consisting of numbers, such as 
1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*) 
wildcard to specify a subtree family; for example 1.3.*.4. 

•

included

—Indicates that the view type is included.

•

excluded

—Indicates that the view type is excluded.

Default Configuration

All views are included by default.

Command Mode

Global Configuration mode

User Guidelines

This command can be entered multiple times for the same view record.

The number of views is limited to 64.

Console (config)# 

snmp-server set sysName

 sysname dell

Console (config)# 

snmp-server set 

rndCommunityTable 

rndCommunityMngStationAddr 0.0.0.0 rndCommunityString public 

rndCommunityAccess super

Содержание PowerConnect 6024

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды