Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Страница: 488 / 504

488
802.1x Commands
www
.dell.com | support.dell.com
Default Configuration
dot1x is disabled.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1x globally:
dot1x port-control
The dot1x port-control interface configuration command enables manual control of the
authorization state of the port. To return to the default setting, use the no form of this command.
Syntax
dot1x port-control { auto | force-authorized | force-unauthorized }
no dot1x port-control
• auto — Enables 802.1x authentication on the interface and causes the port to transition
to the authorized or unauthorized state based on the 802.1x authentication exchange
between the device and the client.
• force-authorized — Disables 802.1x authentication on the interface and causes the port
to transition to the authorized state without any authentication exchange required. The
port resends and receives normal traffic without 802.1x-based authentication of the
client.
• force-unauthorized — Denies all access through this interface by forcing the port to
transition to the unauthorized state, ignoring all attempts by the client to authenticate.
The device cannot provide authentication services to the client through the interface.
Default Configuration
Port is in the force-authorized mode
Command Mode
Interface Configuration (Ethernet) mode
Console(config)# dot1x system-auth-control