manualshive.com logo in svg

Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 6024 Скачать руководство пользователя страница 332

332

RIP Commands

www

.dell.com | support.dell.com

The following table describes the fields shown in the display:

The following example displays IP RIP peer information.

The following table describes the fields shown in the display:

Field

Description

Interface

The interface IP Address.

Received Bad Packets

The number of RIP response packets received by the RIP process which 
were subsequently discarded for any reason (for example, a version 0 
packet, or an unknown command type).

Received Bad Routes

The number of routes, in valid RIP packets, which were ignored for any 
reason (for example, unknown address family, or invalid metric).

Sent Updates

The number of triggered RIP updates actually sent on this interface. This 
explicitly does NOT include full updates sent containing new information.

Console# 

show ip rip peer

Address      Route  Last Update Version Received     Received

             Tag                        Bad Packets  Bad Routes 

----------   ------ ------------------- ------------ ----------

176.16.1.1           10:00:17           20            1

192.168.1.1          10:00:27           20            0

Field

Description

Address

The peer IP Address.

Route Tag

The value in the Routing Domain field in RIP packets received from the 
peer.

Last Update

Time left since the most recent RIP update was received from this system.

Version

The RIP version number in the header of the last RIP packet received.

Received Bad Packets

The number of RIP response packets from this peer discarded as invalid.

Received Bad Routes

The number of routes from this peer that were ignored because the entry 
format was invalid.

Содержание PowerConnect 6024

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды