manualshive.com logo in svg

Dell PowerConnect 6024, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 6024 Скачать руководство пользователя страница 440

440

Commands

www

.dell.com | support.dell.com

If no host-specific timeout, key or source values are specified, the global values apply to each 
host.

To define a server on the out-of-band port, use the out-of-band IP address format: 

oob/

ip-address.

Example

The following example specifies a host:

tacacs-server key

The 

tacacs-server key

 global configuration command sets the authentication and encryption key for 

all communications between the device and the daemon. To disable the 
key, use the 

no 

form of this command. 

Syntax

tacacs-server key

 [

key-string

]

no tacacs-server key

•

key-string—

The authentication and encryption key for all TACACS communications 

between the router and the server. This key must match the encryption used 
on the daemon (Range: 0-128).

Default Configuration

The default is an empty string.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example sets the authentication encryption key:

tacacs-server source-ip

The

 tacacs-server source-ip

 global configuration command specifies the source IP address used for 

communication with servers. To return to the default, use the 

no

 form of this 

command.

Console(config)# 

tacacs-server host 

172.16.1.1

Console(config)# 

tacacs-server key 

dell-s

Содержание PowerConnect 6024

























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды