Dell PowerConnect 5424 Скачать руководство пользователя страница 333

Страница: 333 / 512

SNMP Commands

333

Syntax

•

snmp-server host

{

ip4-address

ip6-address

hostname

}

community-string

[

traps

informs

] [

]

[

udp-port

port

] [

filter

filtername

] [

timeout

seconds

] [

retries

]

•

no snmp-server host

{

ip4-address

ip6-address

hostname

} [

traps

informs

]

•

ip4-address

— The host IPv4 address (the targeted recipient).

•

ip6-address

— The host IPv6 address (the targeted recipient). When the IPv6 address is a Link

Local address (IPv6Z address), the outgoing interface name must be specified. Refer to the usage
guidelines for the interface name syntax.

•

hostname

— Hostname of the host. (Range: 1 - 158 characters)

•

community-string

— Password-like community string sent with the notification operation. (Range:

1 - 20 characters)

•

traps

— Sends SNMP traps to this host (Default).

•

informs

— Sends SNMP informs to this host. Not applicable to SNMPv1.

•

— SNMPv1 traps will be used.

•

— SNMPv2 traps will be used (Default).

•

udp-port

port

— UDP port of the host to use. The default is 162. (Range: 1 - 65535)

•

filter

filtername

— A string that is the name of the filter that define the filter for this host. If

unspecified, does not filter anything. (Range: Up to 30 characters).

•

timeout

seconds

— Number of seconds to wait for an acknowledgment before resending informs.

The default is 15 seconds. (Range: 1 - 300)

•

retries

— Maximum number of times to resend an inform request, when response is not

received for generated message. The default is 3. (Range: 0 - 255)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

The command logical key is the pair (ip-address/hostname, traps/informs).

•

When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient
is automatically generated for all the MIB.

•

When configuring an SNMPv1 notification recipient, the

Inform

option cannot be selected.

5400_CLI.book Page 333 Wednesday, December 17, 2008 4:33 PM

Содержание PowerConnect 5424

































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerConnect 5424

Отзывы:

Похожие инструкции для PowerConnect 5424

Бренды по названию

Популярные бренды

Dell PowerConnect 5424, Руководство по интерфейсу командной строки

Результаты поиска

Содержание PowerConnect 5424

Отзывы:

Похожие инструкции для PowerConnect 5424

Бренды по названию

Популярные бренды