manualshive.com logo in svg

Dell PowerConnect 5424, Руководство по интерфейсу командной строки

Поделиться
Скачать
Dell PowerConnect 5424 Скачать руководство пользователя страница 116

116

Login Banner

•

To customize the banner, use tokens in the form $(token) in the message text.

The following table displays the tokens.

•

To disable the EXEC banner on a particular line or lines, use the no exec-banner line configuration 
command.

Example

The following example sets an EXEC banner that uses tokens. The percent sign (%) is used as a delimiting 
character. Notice that the $(token) syntax is replaced by the corresponding configuration variable.

banner login

The 

banner login

 Global Configuration mode command specifies and enables a message to be displayed 

before the username and password login prompts. Use the 

no

 form of this command to delete the 

existing Login banner.

Token

Information displayed in the banner

$(hostname)

Displays the host name for the device.

$(domain)

Displays the domain name for the device.

$(bold)

Indicates that the next text is a bold text. Using this token again 
indicates the end of the bold text.

$(inverse)

Indicates that the next text is an inverse text. Using this token again 
indicates the end of the inverse text.

$(contact)

Displays the system contact string.

$(location)

Displays the system location string.

$(mac-address)

Displays the base MAC address of the device.

Console# (config)# 

banner exec

 %

Enter TEXT message. End with the character '%'.

$(bold)Session activated.$(bold) Enter commands at the prompt.

%

When a user logs on to the system, the following output is displayed:

Session activated. Enter commands at the prompt.

5400_CLI.book  Page 116  Wednesday, December 17, 2008  4:33 PM

Содержание PowerConnect 5424

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды