background image

Back to Contents Page

  

 

 Glossary  

Dell™ OptiPlex™ 745c User's Guide

 

 
Terms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer. 

 

AC

 

 

alternating current 

 The form of electricity that powers your computer when you plug the AC adapter power cable in to an electrical outlet. 

ACPI

 

 advanced configuration and power interface 

 A power management specification that enables Microsoft

® 

Windows

® 

operating systems to put a 

computer in standby or hibernate mode to conserve the amount of electrical power allocated to each device attached to the computer. 

AGP

 

 accelerated graphics port 

 A dedicated graphics port that allows system memory to be used for video-related tasks. AGP delivers a smooth, true-color 

video image because of the faster interface between the video circuitry and the computer memory. 

AHCI

 

 Advanced Host Controller Interface 

 An interface for a SATA hard drive Host Controller which allows the storage driver to enable technologies such 

as Native Command Queuing (NCQ) and hot plug. 

ALS

 

 ambient light sensor 

 A feature that helps to control display brightness. 

antivirus software

 

 A program designed to identify, quarantine, and/or delete viruses from your computer. 

ASF

 

 alert standards format 

 A standard to define a mechanism for reporting hardware and software alerts to a management console. ASF is designed to 

be platform- and operating system-independent. 

 

battery life span

 

 The length of time (years) during which a portable computer battery is able to be depleted and recharged. 

battery operating time

 

 The length of time (minutes or hours) that a portable computer battery powers the computer. 

BIOS

 

 basic input/output system 

 A program (or utility) that serves as an interface between the computer hardware and the operating system. Unless you 

understand what effect these settings have on the computer, do not change them. Also referred to as 

system setup

bit

 

 The smallest unit of data interpreted by your computer. 

boot sequence

 

 Specifies the order of the devices from which the computer attempts to boot. 

bootable CD

 

 A CD that you can use to start your computer. In case your hard drive is damaged or your computer has a virus, ensure that you always have 

a bootable CD or floppy disk available. Your 

Drivers and Utilities

 (or 

ResourceCD

) is a bootable CD. 

bootable disk

 

 A disk that you can use to start your computer. In case your hard drive is damaged or your computer has a virus, ensure that you always 

have a bootable CD or floppy disk available. 

bps

 

 bits per second 

 The standard unit for measuring data transmission speed. 

BTU

 

 British thermal unit 

 A measurement of heat output. 

bus

 

 A communication pathway between the components in your computer. 

bus speed 

 The speed, given in MHz, that indicates how fast a bus can transfer information. 

byte

 

 The basic data unit used by your computer. A byte is usually equal to 8 bits. 

 

C

 

 Celsius 

 

A temperature measurement scale where 0° is the freezing point and 100° is the boiling point of water.

 

cache

 

 A special high-speed storage mechanism which can be either a reserved section of main memory or an independent high-speed storage device. The 

cache enhances the efficiency of many processor operations. 

L1 cache

 

 Primary cache stored inside the processor. 

L2 cache

 

 Secondary cache which can either be external to the processor or incorporated into the processor architecture. 

carnet

 

 An international customs document that facilitates temporary imports into foreign countries. Also known as a 

merchandise passport

CD-R

 

 CD recordable 

 A recordable version of a CD. Data can be recorded only once onto a CD-R. Once recorded, the data cannot be erased or written 

over. 

CD-RW

 

 CD rewritable 

 A rewritable version of a CD. Data can be written to a CD-RW disc, and then erased and written over (rewritten). 

CD-RW drive

 

 A drive that can read CDs and write to CD-RW (rewritable CDs) and CD-R (recordable CDs) discs. You can write to CD-RW discs multiple times, 

Содержание OptiPlex 745c

























































































































Отзывы: