Dell OptiPlex 745c Скачать руководство пользователя

Страница: 14 / 120

From the boot menu, select the number that appears next to the USB device.

The computer boots to the USB device.

Floppy Drive

In system setup, set the

Diskette Drive

option to

USB

Save and exit system setup.

Connect the USB floppy drive, insert a bootable floppy, and re-boot the system.

Jumper Settings

Clearing Forgotten Passwords

Follow the procedures in

Before You Begin

Locate the 2-pin password jumper (PSWD) on the system board, and remove the jumper to clear the password. See

Jumper Settings

Replace the computer cover (see

Replacing the Computer Cover

Connect your computer and monitor to electrical outlets, and turn them on.

Mini Tower

Jumper

Setting

Description

PSWD

Password features are enabled (default setting).

Password features are disabled.

RTCRST

The real-time clock has not been reset.

The real-time clock is being reset (jumpered temporarily).

jumpered

unjumpered

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the

Product Information Guide

NOTICE:

This process erases both the system and administrator passwords.

NOTE:

The MEBx password is reset using the RTCRST jumper to clear CMOS and unprovision AMT.

Содержание OptiPlex 745c

























































































































Результаты поиска

Содержание OptiPlex 745c

Отзывы:

Похожие инструкции для OptiPlex 745c

Бренды по названию

Популярные бренды

Dell OptiPlex 745c, Руководство пользователя

Результаты поиска

Содержание OptiPlex 745c

Отзывы:

Похожие инструкции для OptiPlex 745c

Бренды по названию

Популярные бренды