Dell OptiPlex 745c Скачать руководство пользователя страница 21

Страница: 21 / 120

Back to Contents Page

Cleaning Your Computer

Dell™ OptiPlex™ 745c User's Guide

Computer, Keyboard, and Monitor

Mouse

Floppy Drive

CDs and DVDs

Computer, Keyboard, and Monitor

Use a can of compressed air to remove dust from between the keys on the keyboard.

To clean your monitor screen, lightly dampen a soft, clean cloth with water. You can also use a special screen-cleaning tissue or solution suitable for the

monitor's antistatic coating.

Wipe the keyboard, computer, and monitor plastics with a soft cleaning cloth moistened with a solution of three parts water and one part dishwashing

detergent.

Do not soak the cloth or let water drip inside your computer or keyboard.

Mouse

If your screen cursor skips or moves abnormally, clean the mouse.

Cleaning a Non-Optical Mouse

Clean the outside casing of the mouse with a cloth moistened with a mild cleaning solution.

Turn the retainer ring on the underside of your mouse counterclockwise, and then remove the ball.

Wipe the ball with a clean, lint-free cloth.

Blow carefully into the ball cage or use a can of compressed air to dislodge dust and lint.

If the rollers inside the ball cage are dirty, clean the rollers with a cotton swab moistened lightly with isopropyl alcohol.

Recenter the rollers in their channels if they are misaligned. Ensure that fluff from the swab is not left on the rollers.

Replace the ball and retainer ring, and turn the retainer ring clockwise until it clicks into place.

Cleaning an Optical Mouse

Clean the outside casing of the mouse with a cloth moistened with a mild cleaning solution.

Floppy Drive

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

CAUTION:

Before you clean your computer, disconnect the computer from the electrical outlet. Clean your computer with a soft cloth dampened

with water. Do not use liquid or aerosol cleaners, which may contain flammable substances.

NOTICE:

To prevent damage to the antiglare coating, do not wipe the display with soap or alcohol.

NOTICE:

Disconnect the mouse from the computer before cleaning the mouse.

NOTICE:

Do not attempt to clean drive heads with a swab. You might accidentally misalign the heads which prevents the drive from operating.

Содержание OptiPlex 745c

























































































































Результаты поиска

Содержание OptiPlex 745c

Отзывы:

Похожие инструкции для OptiPlex 745c

Бренды по названию

Популярные бренды

Dell OptiPlex 745c, Руководство пользователя

Результаты поиска

Содержание OptiPlex 745c

Отзывы:

Похожие инструкции для OptiPlex 745c

Бренды по названию

Популярные бренды