Dell OptiPlex 3020 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 63

background image

Option

Description

• Every Day
• Weekdays
• Select Days

Deep Sleep Control

Allows you to define the controls when Deep Sleep is enabled.

• Disabled
• Enabled in S5 only
•

Enabled in S4 and S5

Enabled

Fan Speed Control

Controls the speed of the system fan. This option is disabled by default.

NOTE: When enabled, the fan runs at full speed.

USB Wake Support

This option allows you to enable USB devices to wake the computer from
standby.

•

Enable USB Wake Support

- This option is enabled by default.

Wake on LAN

This option allows the computer to power up from the off state when triggered
by a special LAN signal. Wake-up from the Standby state is unaffected by this
setting and must be enabled in the operating system. This feature only works
when the computer is connected to AC power supply. The options differ based

on the form factor.

•

Disabled

- Does not allow the system to power on by special LAN

signals when it receives a wake-up signal from the LAN or wireless LAN.

•

LAN Only

- Allows the system to be powered on by special LAN signals.

•

LAN or PXE Boot

- Allows the system to be powered on by special LAN

or PXE Bootsignals. (For Ultra Small Form Factor only)

This option is Disabled by default.

Block Sleep

Allows you to block entering to sleep (S3 state) in OS Environment.
Default Setting:

Disabled

Intel Smart Connect

Technology

The option is disabled by default. If option enables will periodically sense

nearby wireless connection while the system is asleep. It will synchronize
emails or social media application that were open when system entered the
sleep state.

• Smart Connection

Table 9. POST Behavior

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This

option is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This

option is enabled by default.

42

«
...
40
41
42
43
44
...
»

Содержание OptiPlex 3020
































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 3020

POWERMATE ES 5250 - S

Бренд: NEC Страницы: 18

POWERMATE VT 300 RELEASE NOTES

Бренд: NEC Страницы: 16

POWERMATE CT 815 - RELEASE NOTES

Бренд: NEC Страницы: 155

Бренд: NEC Страницы: 6

POWERMATE ES Series

Бренд: NEC Страницы: 132

POWERMATE ES Series

Бренд: NEC Страницы: 8

Бренд: NEC Страницы: 167

Бренд: NEC Страницы: 1

Mac Mini Model A1347

Бренд: iFixit Страницы: 13

Бренд: Tandy Страницы: 138

Бренд: Zotac Страницы: 57

6862 - PC 300 PL

Бренд: IBM Страницы: 208

Бренд: AWOW Страницы: 4

621410U - IntelliStation E - Pro 6214

Бренд: IBM Страницы: 176

PCV-RS422X - Vaio Desktop Computer

Бренд: Sony Страницы: 1

PCV-RS421 - Vaio Desktop Computer

Бренд: Sony Страницы: 1

PCV-RS420 - Vaio Desktop Computer

Бренд: Sony Страницы: 1

PCV-RS411 - Vaio Desktop Computer

Бренд: Sony Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды