Dell OptiPlex 3020 Скачать руководство пользователя страница 38

Страница: 38 / 63

Option

Description

part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification.

•

Enable SMART Reporting

- This option is disabled by

default.

USB Configuration

Allows you to enable or disable the internal USB configuration.
The options are:

• Enable Boot Support
• Enable Front USB Ports
• Enable USB 3.0 Ports
• Enable Rear Dual USB 2.0 Ports
• Enable Dual USB 2.0 Ports (Under LAN ports)

Audio

Allows you enable or disable the audio feature.
Default Setting:

Audio is enabled

Table 4. Video

Option

Description

Multi-Display

Allows you to enables or disables Multi-

Display, it should be enabled for
windows 7 32/64bit or later only.

• Disable Multi Display

Table 5. Security

Option

Description

Admin Password

This field lets you set, change, or delete the administrator (admin) password

(sometimes called the setup password). The admin password enables several
security features.
The drive does not have a password set by default.

• Enter the old password
• Enter the new password
• Confirm the new password

System Password

This field lets you set, change, or delete the system password. The system

password enables several security features.
The drive does not have a password set by default.

• Enter the old password
• Enter the new password
• Confirm the new password

Internal HDD_0

Password

Allows you to set, change, or delete the password on the computer’s internal

hard disk drive (HDD) Successful change to this password take effect
immediately. The drive does not have a password set by default

• Enter the old password

Содержание OptiPlex 3020
































































Результаты поиска

Содержание OptiPlex 3020

Отзывы:

Похожие инструкции для OptiPlex 3020

Бренды по названию

Популярные бренды

Dell OptiPlex 3020, Руководство пользователя

Результаты поиска

Содержание OptiPlex 3020

Отзывы:

Похожие инструкции для OptiPlex 3020

Бренды по названию

Популярные бренды