Dell N2000 Series, Руководство по настройке

Страница: 1214 / 1460

1214
Configuring RIP
console(config-if-vlan10)# ip address 192.168.10.1 255.255.255.0
console(config-if-vlan10)# ip rip
console(config-if-vlan10)# ip rip receive version both
console(config-if-vlan10)# ip rip send version rip2
console(config-if-vlan10)#
exit
console(config)# interface vlan 20
console(config-if-vlan20)# ip address 192.168.20.1 255.255.255.0
console(config-if-vlan20)# ip rip
console(config-if-vlan20)# ip rip receive version both
console(config-if-vlan20)# ip rip send version rip2
console(config-if-vlan20)# exit
console(config)# interface vlan 30
console(config-if-vlan30)# ip address 192.168.30.1 255.255.255.0
console(config-if-vlan30)# ip rip
console(config-if-vlan30)# ip rip receive version both
console(config-if-vlan30)# ip rip send version rip2
console(config-if-vlan30)# exit
4 Enable auto summarization of subprefixes when crossing classful
boundaries.
console(config)# router rip
console(config-router)# auto-summary
console(config-router)# exit
console(config)# exit
5 Verify the configuration
console# show ip rip
RIP Admin Mode.......................... Enable
Split Horizon Mode...................... Simple
Auto Summary Mode....................... Enable
Host Routes Accept Mode................. Enable
Global route changes.................... 0
Global queries.......................... 0
Default Metric.................... Not configured
Default Route Advertise........... 0
console# show ip rip interface brief
Interface IP Address Send
Version
Receive
Version
RIP
Mode
Link
State
---------- ------------ --------- ------- -------- ------
Vl1 0.0.0.0 RIP-2 RIP-2 Disable Down