Dell N2000 Series, Руководство по настройке

Страница: 1188 / 1460

1188
Configuring OSPF and OSPFv3
4 Set the OSPFv3 router ID.
console(config)# ipv6 router ospf
console(config-rtr)#
router-id 1.1.1.1
console(config-rtr)# exit
5 Configure the IPv4 address and OSPF area for VLAN 15.
console(config)#i nterface vlan 15
console(config-if-vlan15)#ip address 20.20.20.1 255.255.255.0
console(config-if-vlan15)# ip ospf area 0.0.0.0
console(config-if-vlan15)# exit
6
Configure the IPv6 address and OSPFv3 information for VLAN 2.
console(config)# interface vlan 2
console(config-if-vlan2)# ipv6 address 2020:1::1/64
console(config-if-vlan2)# ipv6 ospf
console(config-if-vlan2)# ipv6 ospf network point-to-point
console(config-if-vlan2)# exit
7 Configure the tunnel.
console(config)# interface tunnel 0
console(config-if-tunnel0)# ipv6 address 2001::1/64
console(config-if-tunnel0)# tunnel mode ipv6ip
console(config-if-tunnel0)# tunnel source 20.20.20.1
console(config-if-tunnel0)# tunnel destination 10.10.10.1
console(config-if-tunnel0)# ipv6 ospf
console(config-if-tunnel0)# ipv6 ospf network point-to-point
console(config-if-tunnel0)# exit
8 Configure the loopback interface. The switch uses the loopback IP address
as the OSPF and OSPFv3 router ID.
console(config)# interface loopback 0
console(config-if-loopback0)# ip address 1.1.1.1 255.255.255.0
console(config-if-loopback0)# exit
console(config)# exit