background image

EMI

 

 electromagnetic interference 

 Electrical interference caused by electromagnetic radiation. 

EPP

 

 enhanced parallel port 

 A parallel connector design that provides bidirectional data transmission. 

ESD

 

 electrostatic discharge 

 A rapid discharge of static electricity. ESD can damage integrated circuits found in computer and communications equipment. 

expansion card

 

 A circuit board that installs in an expansion slot on the system board in some computers, expanding the capabilities of the computer. 

Examples include video, modem, and sound cards. 

expansion slot

 

 A connector on the system board (in some computers) where you insert an expansion card, connecting it to the system bus. 

ExpressCard

 

 A removable I/O card adhering to the PCMCIA standard. Modems and network adapters are common types of ExpressCards. ExpressCards 

support both the PCI Express and USB 2.0 standard. 

Express Service Code

 

 

A numeric code located on a sticker on your Dell™ computer. Use the Express Service Code when contacting Dell for assistance. 

Express Service Code service may not be available in some countries. 

extended display mode

 

 A display setting that allows you to use a second monitor as an extension of your display. Also referred to as 

dual display mode

extended PC Card

 

 A PC Card that extends beyond the edge of the PC Card slot when installed. 

 

Fahrenheit

 

 

A temperature measurement scale where 32° is the freezing point and 212° is the boiling point of water.

 

FBD

 

 fully-buffered DIMM 

 A DIMM with DDR2 DRAM chips and an Advanced Memory Buffer (AMB) that speeds communication between the DDR2 SDRAM 

chips and the system. 

FCC

 

 Federal Communications Commission 

 A U.S. agency responsible for enforcing communications-related regulations that state how much radiation 

computers and other electronic equipment can emit. 

fingerprint reader 

 A strip sensor that uses your unique fingerprint to authenticate your user identity to help secure your computer.  

folder

 

 A term used to describe space on a disk or drive where files are organized and grouped. Files in a folder can be viewed and ordered in various ways, 

such as alphabetically, by date, and by size. 

format

 

 The process that prepares a drive or disk for file storage. When a drive or disk is formatted, the existing information on it is lost. 

FSB

 

 front side bus 

 The data path and physical interface between the processor and RAM. 

FTP

 

 file transfer protocol 

 A standard Internet protocol used to exchange files between computers connected to the Internet. 

 

G

 

 gravity 

 A measurement of weight and force. 

GB

 

 gigabyte 

 A measurement of data storage that equals 1024 MB (1,073,741,824 bytes). When used to refer to hard drive storage, the term is often 

rounded to 1,000,000,000 bytes. 

GHz

 

 gigahertz 

 A measurement of frequency that equals one thousand million Hz, or one thousand MHz. The speeds for computer processors, buses, and 

interfaces are often measured in GHz. 

graphics mode

 

 A video mode that can be defined as 

x

 horizontal pixels by 

y

 vertical pixels by 

z

 colors. Graphics modes can display an unlimited variety of 

shapes and fonts. 

GUI

 

 graphical user interface 

 Software that interacts with the user by means of menus, windows, and icons. Most programs that operate on the Windows 

operating systems are GUIs. 

 

hard drive

 

 A drive that reads and writes data on a hard disk. The terms hard drive and hard disk are often used interchangeably. 

heat sink

 

 A metal plate on some processors that helps dissipate heat. 

hibernate mode

 

 A power management mode that saves everything in memory to a reserved space on the hard drive and then turns off the computer. 

When you restart the computer, the memory information that was saved to the hard drive is automatically restored. 

HTTP

 

 hypertext transfer protocol 

 A protocol for exchanging files between computers connected to the Internet.  

Hz

 

 hertz 

 A unit of frequency measurement that equals 1 cycle per second. Computers and electronic devices are often measured in kilohertz (kHz), 

megahertz (MHz), gigahertz (GHz), or terahertz (THz). 

 

Содержание Latitude D530

















































Отзывы: