Dell Latitude D530 Скачать руководство пользователя страница 48

Страница: 48 / 48

Back to Contents Page

Dell™ Latitude™ D530 Service Manual

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo,

Latitude, and Dell OpenManage

are trademarks of Dell Inc.;

Intel

Pentium, and Celeron

are registered trademarks of Intel

Corporation;

Microsoft

Windows, Windows Server, Windows XP, MS-DOS and Windows Vista

are either trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Back to Contents Page

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Содержание Latitude D530

















































Результаты поиска

Содержание Latitude D530

Отзывы:

Похожие инструкции для Latitude D530

Бренды по названию

Популярные бренды

Dell Latitude D530, Руководство по обслуживанию

Результаты поиска

Содержание Latitude D530

Отзывы:

Похожие инструкции для Latitude D530

Бренды по названию

Популярные бренды