Back to Contents Page
System Fan
Dell™ Latitude™ D530 Service Manual
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the palm rest (see
Removing the Palm Rest
).
3.
Remove the two M2.5 x 5-mm screws from the fan, and then remove the connector that connects the fan to the system board
Back to Contents Page
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
1 M2.5 x 5-mm screws (2) 2 fan 3 fan connector
4 system board connector
Содержание Latitude D530
Страница 11: ...2 Tighten the six captive screws labeled 1 through 6 in consecutive order Back to Contents Page ...
Страница 16: ...2 Replace the support bracket and replace the M2 x 4 mm screw Back to Contents Page ...
Страница 30: ...Back to Contents Page ...
Страница 44: ...2 Replace the M2 5 x 5 mm screw that secures the speaker assembly in place Back to Contents Page ...
