c.
Slide the card at a 45-degree angle out of its connector.
5.
Install the card:
a.
Move any antenna cables out of the way to make space for the WLAN card.
b.
Align the card with the connector at a 45-degree angle, and press the card into the connector until it clicks.
c.
Connect the antenna cables to the WLAN card, ensuring that you route the cables correctly.
Captive Screw
Back to Contents Page
1 WLAN card 2 metal securing tabs (2)
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTE:
Do not insert a Mobile Broadband (WWAN) network card into the WLAN card connector.
NOTE:
The WLAN card may have two or three antenna connectors, depending on the type of card you ordered.
NOTICE:
To avoid damaging the WLAN card, never place cables on top of or under the card.
NOTE:
For more specific information about which cable to connect to which connector, see the documentation that came with your WLAN card.
Содержание Latitude D530
Страница 11: ...2 Tighten the six captive screws labeled 1 through 6 in consecutive order Back to Contents Page ...
Страница 16: ...2 Replace the support bracket and replace the M2 x 4 mm screw Back to Contents Page ...
Страница 30: ...Back to Contents Page ...
Страница 44: ...2 Replace the M2 5 x 5 mm screw that secures the speaker assembly in place Back to Contents Page ...