Dell IP4700, Инструкция по установке и обслуживанию

Страница: 10 / 126

x IP4700 Installation and Service Guide
Preface
Here is an overview of where information is located in this manual:
Chapter 1 introduces the IP4700’s components.
Chapter 2 explains requirements and describes how to install the
IP4700 and cable it to the LAN and to Disk Array Enclosures (DAEs).
Chapter 3 describes how to replace CRUs such as disk modules.
Chapter 4 introduces the Standby Power Supply (SPS) and explains
how to install and connect cables to them. In addition, it explains how
to replace the SPS.
Appendix A lists the IP4700 and SPS technical specifications.
Glossary defines terms used in the Fibre Channel environment.
Related
Documentation
Other related manuals include:
•
EMC Fibre Channel Disk Array Enclosure (DAE) Rackmount Model
Hardware Reference
(014002591)
• IP4700 Administrator’s Guide (069701169)
• IP4700 Quick Start Guide (069701170)
• IP4700 Release Notes (085600156)
Conventions Used in
This Manual
EMC uses the following conventions for notes, cautions, warnings,
and danger notices.
CAUTION
!
A caution contains information essential to avoid damage to the
system or equipment. The caution may apply to hardware or
software.
WARNING
A warning contains information essential to avoid a hazard that can
cause severe personal injury, death, or substantial property damage
if you ignore the warning.
DANGER
A danger notice contains information essential to avoid a hazard
that will cause severe personal injury, death, or substantial property
damage if you ignore the warning.