Dell IP4700, Инструкция по установке и обслуживанию

Страница: 30 / 126

1
1-12
IP4700 Installation and Service Guide
The IP4700
Link Control Cards (LCCs)
A link control card (see Figure 1-8) connects Fibre Channel signalling
to the disk modules. The link control card provides
• Fibre Channel connectivity between the storage processor, disks,
and other enclosures
• Bypass capability for faulted or missing units
• Monitor and control of the enclosure elements
Figure 1-8
Link Control Card
Each link control card independently monitors the environmental
status of the entire IP4700, using a microcomputer-controlled
customer-replaceable unit (CRU) monitor. The CRU monitor
communicates status to the storage processor server using special
protocols. These protocols let the storage processor poll IP4700 status
and send commands that control the disk-module check lights.
Each link control card has two status LEDs visible from the back of
the IP4700. For the meaning of these LEDs, see the Monitoring IP4700
Status section in Chapter 3.
A latch on the link control card locks it into place to ensure proper
connection to the midplane. You can add or replace a link control
card while the IP4700 is powered up.
CAUTION
!
Removing a link control card or storage processor will cause a
failover, that is, an automatic transfer of one or more file systems
from one storage processor to another.
EMC1458
Expansion
FC-AL cable
connector (EXP)
Active
LED
(green)
Fault
LED
(amber)