2-6
Dell Inspiron 7000 Reference and Troubleshooting Guide
)''&RQWUROOHU
Enables the diskette-drive controller. If this option is set to
Disabled
, the diskette
drive is unavailable.
,QWHUQDO03(*,,
This option appears if your computer has a digital versatile disc (DVD)-ROM drive. This
option allows you to select a device to provide Moving Pictures Experts Group
(MPEG)-2 capabilities.
Enabled
(the default) selects the internal MPEG-2 card.
Dis-
abled
selects a PC card.
6HULDO3RUW
Serial Port
lets you map the address of the serial port to avoid address conflicts with
other devices or disable the port for security. The default is
Auto
, and the default base
input/output (I/O) and interrupt request (IRQ) address is 3F8 IRQ4. Dell recommends
that you retain the default.
If for some reason you need to change the serial port address, be careful not to create
a conflict with the address of the infrared port.
NOTE: If there is a conflict between two or more addresses, an asterisk appears next
to the port type in the
System Devices
menu.
,QIUDUHG3RUW
Infrared Port
lets you map the address of the infrared port to avoid address conflicts
with other devices. The default is
Disabled
. Dell recommends that you retain the
default settings.
If for some reason you need to change the infrared port address in the Setup pro-
gram, be careful not to create a conflict with the addresses of the serial port or the
parallel port.
NOTE: If there is a conflict between two or more addresses, an asterisk appears next
to the port type in the
System Devices
menu.
3DUDOOHO3RUW
Parallel Port
controls whether the computer’s parallel port acts as advanced
technology (AT)-compatible (unidirectional), Personal System (PS)/2-compatible (bi-
directional), Enhanced Parallel Port (EPP)-compatible, or Extended Capabilities Port
(ECP)-compatible. Options are
Enabled
,
Disabled
, and
Auto
(the default). The default
is
ECP
. Other possible mode settings are
Normal
,
EPP
,
and
bidirectional
.
When set to
Disabled
, you can disable the port and free its assigned LPT address for
another device.
When set to
Enabled
, you configure the port settings. The default base I/O address is
378h. If for some reason you need to change the parallel port address and/or direct
Содержание Inspiron 7000
