Dell Inspiron 7000, Справочное и ремонтное руководство, Страница: 60 / 161

3-14 Dell Inspiron 7000 Reference and Troubleshooting Guide
3. If the options bay slot is wet, remove the device from the bay. If the PC Card slot
is wet, remove any PC Cards. Put the device and cards in a safe place to dry.
4. Ground yourself by touching one of the metal connectors on the back of the
computer.
5. Turn the computer over and remove the two screws at the front of the hard-disk
drive carrier. A spring will cause the front edge of the cover to pop up.
6. Pull the hard-disk drive forward until it stops, and then pull it up. When the hard-
disk drive is not in the computer, protect the drive from exposure to static
electricity.
7. Turn the computer over and remove the memory module cover as shown in
Figure 3-5.
Slide the memory module cover as far as it will go in the direction of the arrow
and then lift it away from the computer.
)LJXUH5HPRYLQJWKH0HPRU\0RGXOH&RYHU
8. Open the display, and place the computer across two books or similar props to
let air circulate all around it. Let the computer dry for at least 24 hours.
Place the computer in a dry area at room temperature. Do not use artificial
means to speed up the drying process.
:$51,1*%HIRUHFRQWLQXLQJZLWKWKHUHPDLQGHURIWKLVSURFHGXUH
YHULI\WKDWWKHFRPSXWHULVWKRURXJKO\GU\
9. Ground yourself by touching one of the unpainted metal connectors on the I/O
panel.
10. Replace the memory module cover.
11. Reinstall the hard-disk drive, align the screw holes, and replace the two screws
you removed in step 5.
memory module
cover
bottom of computer