Dell Inspiron 7000, Справочное и ремонтное руководство

Страница: 86 / 161

4-6 Dell Inspiron 7000 Reference and Troubleshooting Guide
Do not be concerned if the System Configuration area does not list the names of all
the components or devices you know are part of the computer. For example, you may
not see a printer listed, although you know one is attached to the computer. Instead,
the printer is listed as a parallel port. The computer recognizes the parallel port as
LPT1, which is an address that tells the computer where to send outgoing information
and where to look for incoming information. Because your printer is a parallel commu-
nications device, the computer recognizes the printer by its LPT1 address and
identifies it as a parallel port.
+RZWR8VHWKH0HQX
One of the menu options is already highlighted at the bottom of the screen. You can
move the highlighting from one option to another by pressing the left- or right-arrow
key. As you move from one menu option to another, a brief explanation of the cur-
rently highlighted option appears on the bottom line of the screen.
If you want more information about a test group or subtest, move the highlight to the
About option and press <Enter>. After reading the information, press <Esc> to
return to the previous screen.
0DLQ0HQX2SWLRQV
The Main menu of the diagnostics main screen lists eight options: Run , Select ,
Subtest , Options , Test Limits , About , Key-Help , and Quit .
NOTE: Before running any test groups or subtests (by selecting Run and then All ), you
should consider setting global parameters within the Options option. They offer you greater
control over how the test groups or subtests are run and how their results are reported.
There are two ways to select a menu option:
‡
Type the capitalized letter in the option (for example, type
r
to select the Run option).
‡
Use the left- or right-arrow key to highlight the option, and then press <Enter>.
Whenever one of the eight options is selected, additional choices become available.
The following subsections explain the menu options as listed from left to right in the
Main menu.
5XQ
Run displays five options: One , Selected , All , Key-Help , and Quit Menu . If you
select One , only the highlighted test group is run. If you choose Selected , the com-
puter runs the test groups, or the selected subtests within the test groups that you
selected. (Select test groups or subtests within test groups with the
Select or Sub-
test options, as described in the following subsections.) If you select All , all of the
subtests in all of the test groups are run. (The test groups or subtests are run in the
order they are listed.)
The Key-Help option displays a list of key controls available for the selected option.
The Quit Menu option returns you to the Main menu.