Dell Inspiron 5421 Скачать руководство пользователя страница 109

Страница: 109 / 127

Table 7. System setup options—Integrated Devices menu (continued)

Integrated Devices

By default, the option is disabled.

Video/Power only on Type-C Ports

Enable or disable the Type-C port functionality to video or only power.

By default, the

Video/Power only on Type-C Ports

option is disabled.

Type-C Dock Override

Enables to use connected Type-C Dell Dock to provide data stream with
external USB ports disabled. When Type-C Dock override is enabled, the
Video/Audio/Lan submenu is activated.

By default, the

Type-C Dock Override

option is enabled.

Type-C Dock Audio

Enable or disable the usage of video on Dell Dock external ports.

By default, the

Type-C Dock Audio

option is enabled.

Type-C Dock Lan

Enable or disable the usage of LAN on Dell Dock external ports.

By default, the

Type-C Dock Lan

option is enabled.

Miscellaneous Devices

Enable or disable Fingerprint Reader device.

By default, the

Enable Fingerprint Reader Device

option is enabled.

Unobtrusive Mode

Enable Unobtrusive Mode

Enable or disable all the computer light and sound.

By default, the

Enable Unobtrusive Mode

option is disabled.

Table 8. System setup options—Storage menu

Storage

SATA/NVMe Operation

Sets the operating mode of the integrated storage device controller

By default, the

RAID ON

option is not enabled.

Storage Interface

Allows onboard drive to be enabled or disabled.

By default, the

M.2 PCIe SSD

option is not enabled.

SMART Reporting

Enable SMART Reporting

Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.

By default, the

Enable SMART Reporting

option is not enabled.

Drive Information

M.2 PCIe SSD

Type

Displays the M.2 PCIe SSD type information of the computer.

Device

Displays the M.2 PCIe SSD device information of the computer.

Enable MediaCard

Secure Digital (SD) Card

Enable or disable the SD card.

By default, the

Secure Digital (SD) Card

option is enabled.

Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.

By default, the

Secure Digital (SD) Card Read-Only Mode

option is not

enabled.

System setup

109

Содержание Inspiron 5421
































































































































Результаты поиска

Содержание Inspiron 5421

Отзывы:

Похожие инструкции для Inspiron 5421

Бренды по названию

Популярные бренды

Dell Inspiron 5421, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 5421

Отзывы:

Похожие инструкции для Inspiron 5421

Бренды по названию

Популярные бренды