Dell Inspiron 5421 Скачать руководство пользователя страница 108

Страница: 108 / 127

Table 6. System setup options—Boot Configuration menu

Boot Configuration

Boot Sequence

Boot mode

Displays the boot mode.

Boot Sequence

Displays the boot sequence.

Secure Digital (SD) Card Boot

Enable or disable the SD card read-only boot.

By default, the

Enable Secure Digital (SD) Card Boot

option is not enabled.

Secure Boot

Enable Secure Boot

Enable or disable the secure boot feature.

By default, the option is not enabled.

Secure Boot Mode

Enable or disable to change the secure boot mode options.

By default, the

Deployed Mode

is enabled.

Expert Key Management

Enable Custom Mode

Enable or disable custom mode.

By default, the

Enable Custom Mode

option is not enabled.

Custom Mode Key Management

Select the custom values for expert key management.

Table 7. System setup options—Integrated Devices menu

Integrated Devices

Date/Time

Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.

Camera

Enables or disable the camera.

By default, the

Enable Camera

option is selected

Audio

Enable Audio

Enable or disable the integrated audio controller.

By default, all the options are enabled.

USB/Thunderbolt Configuration

●

Enable or disable booting from USB mass storage devices connected to
external USB ports.

By default, the

Enable External USB Ports

option is enabled.

●

Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.

By default, the

Enable USB Boot Support

option is enabled.

Enable Thunderbolt Technology
Support

Enable or disable the associated ports and adapters.

By default, the

Enable Thunderbolt Technology Support

option is selected.

Enable Thunderbolt Boot Support

Enable or disable the Thunderbolt adapter peripheral device and USB devices
connected to the Thunderbolt adapter to be used during BIOS Pre-boot.

By default, the

Enable Thunderbolt Boot Support

option is disabled.

Enable Thunderbolt (and PCIe behind
TBT) pre-boot modules

Enable or disable the PCIe devices that are connected through a Thunderbolt
adapter to execute the PCIe devices UEFI Option ROM (if present) during
pre-boot.

By default, the

Enable Thunderbolt (and PCIe behind TBT) pre-boot

modules

option is disabled.

Disable USB4 PCIE Tunneling

Disable the USB4 PCIE Tunneling option.

108

System setup

Содержание Inspiron 5421
































































































































Результаты поиска

Содержание Inspiron 5421

Отзывы:

Похожие инструкции для Inspiron 5421

Бренды по названию

Популярные бренды

Dell Inspiron 5421, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 5421

Отзывы:

Похожие инструкции для Inspiron 5421

Бренды по названию

Популярные бренды