Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1
Place the display assembly face down on the palm-rest assembly.
2
Align the screw holes on the display hinges with the screw holes on the
palm-rest assembly.
3
Replace the screws that secure the display assembly to the palm-rest
assembly.
4
Close the display and turn the computer over.
5
Slide the display cable and the touch-screen board-cable into their
respective connectors on the system board and close the latches to
secure the cables.
6
Adhere the pieces of tape that secure the display cable and the touch-
screen board-cable to their respective connectors on the system board.
Post-requisites
1
.
2
.
3
.
71
Содержание Inspiron 13 5000
