manualshive.com logo in svg

Dell Inspiron 13 5000, Руководство по обслуживанию

Поделиться
Скачать
Dell Inspiron 13 5000 Скачать руководство пользователя страница 106

Cleaning the display

CAUTION: Do not use substances such as alcohol, chemicals, or 
household cleaners for cleaning the display.

CAUTION: To avoid damaging the display, do not apply force when 
cleaning and wipe off any remaining liquid after cleaning.

NOTE: A commercial display cleaning kit should be used for cleaning. If 
unavailable, use a soft, damp microfiber cloth lightly sprayed with 
distilled water.

1 

Turn off your computer and display before cleaning.

2 

Gently wipe the display in circular motions to remove any dust or dirt 

particles.

3 

Let the display dry thoroughly before turning it on.

HDMI

The Inspiron 13-5378 supports HDMI to connect a TV or another HDMI-in 
enabled device. It provides video and audio output. The HDMI port is located 
on the left side of your computer.

NOTE: Appropriate converters (sold separately) are required to connect 

standard DVI and DisplayPort devices.

Connecting to external display devices

1 

Connect the HDMI cable to your computer and the external display.

2 

Press F8 to display the different modes.

106

Содержание Inspiron 13 5000








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды