Dell Inspiron 1000, Руководство пользователя, Страница: 89 / 210

Adding and Replacing Parts
89
Adding and Replacing Parts
Before You Begin
This chapter provides procedures for removing and installing the components
in your computer. Unless otherwise noted, each procedure assumes that the
following conditions exist:
• You have performed the steps in "Turning Off Your Computer" (see
"Turning Off Your Computer" on page 89) and "Before Working Inside
Your Computer" (see "Before Working Inside Your Computer" on page 90).
• You have read the safety information in your Dell™ Product Information
Guide.
• A component can be replaced or—if purchased separately—installed by
performing the removal procedure in reverse order.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe
• Flash BIOS update (see the Dell Support website at support.dell.com )
Turning Off Your Computer
NOTICE:
To avoid losing data, save and close any open files and exit any open
programs before you turn off your computer.
1
Shut down the operating system:
a
Save and close any open files, exit any open programs, click the Start
button, and then click Turn Off Computer .
b
In the Turn off computer window, click Turn off .
The computer turns off after the operating system shutdown process
finishes.
book.book Page 89 Friday, October 19, 2007 2:03 PM