Dell EMC VxFlex Ready Node 14G, Руководство по установке оборудования

Страница: 70 / 86

Figure 29 Pull the inner rails out of the cabinet
2. Locate the rear rail standoff on each side of the system. Position the system
above the rails and lower the rear rail standoffs into the rear J-slots on the slide
assemblies.
3. Rotate the system downward until all the rail standoffs are seated in the J-slots.
Figure 30 Install the system in the rails
4. Push the system inward until the lock levers click into place.
5. Pull the blue slide release lock tabs forward on both rails and slide the system
into the cabinet. The slam latches will engage to secure the system in the
cabinet.
2U1N Configuration Equipment Installation
70 Hardware Installation Guide